105. May, D., Aktas, A., Advani, S.G., Berg, D.C., Endruweit, A., Fauster, E., Lomov, S.V., Long, A., Mitschang, P.,
Abaimov, S., Abliz, D., Akhatov, I., Ali, M.A., Allen, T.D., Bickerton, S., Bodaghi, M., Caglar, B., Caglar, H., Chiminelli, A., Correia, N., Cosson, B., Danzi, M., Dittmann, J., Ermanni, P., Francucci, G., George, A.,
Grishaev, V., Hancioglu, M., Kabachi, M.A., Kind, K., Deléglise-Lagardère, M., Laspalas, M., Lebedev, O.V., Lizaranzu, M., Liotier, P.-J., Middendorf, P., Morán, J., Park, C.-H., Pipes, R.B., Pucci, M.F., Raynal, J., Rodriguez, E.S., Schledjewski, R., Schubnel, R., Sharp, N., Sims, G., Sozer, E.M., Sousa, P., Thomas, J., Umer, R., Wijaya, W., Willenbacher, B., Yong, A., Zaremba, S., Ziegmann, G.
(2019).In-plane permeability characterization of engineering textiles based on radial flow experiments: A benchmark exercise.
Composites Part A: Applied Science and Manufacturing,121100-114
DOI: 10.1016/j.compositesa.2019.03.006
Scopus:
2-s2.0-85063045385
106.
Safonov, A.A. (2019).3D topology optimization of continuous fiber-reinforced structures via natural evolution method.
Composite Structures,215289-297
DOI: 10.1016/j.compstruct.2019.02.063
Scopus:
2-s2.0-85061899976 107. Matveeva, A.Y.,
Lomov, S.V., Gorbatikh, L.
(2019).Debonding at the fiber/matrix interface in carbon nanotube reinforced composites: Modelling investigation.
Computational Materials Science,159412-419
DOI: 10.1016/j.commatsci.2018.10.031
Scopus:
2-s2.0-85058981457 108.
Evlashin, S.A., Maksimov, Y.M., Dyakonov, P.V., Pilevsky, A.A., Maslakov, K.I., Mankelevich, Y.A., Voronina, E.N., Vavilov, S.V., Pavlov, A.A., Zenova, E.V., Akhatov, I.S., Suetin, N.V.
(2019).N-Doped Carbon NanoWalls for Power Sources.
Scientific Reports,9(1)
DOI: 10.1038/s41598-019-43001-3
Scopus:
2-s2.0-85064931286
109. Zhao, H., McLoughlin, L., Adzhiev, V.,
Pasko, A. (2019).3D mass customization toolkits design, Part I: Survey and an evaluation model.
Computer-Aided Design and Applications,16(2) 204-222
DOI: 10.14733/cadaps.2019.204-222
Scopus:
2-s2.0-85053294265 110.
Evlashin, S., Dyakonov, P., Tarkhov, M., Dagesyan, S., Rodionov, S., Shpichka, A., Kostenko, M., Konev, S.,
Sergeichev, I., Timashev, P.,
Akhatov, I. (2019).Flexible polycaprolactone and polycaprolactone/graphene scaffolds for tissue engineering.
Materials,12(18) DOI: 10.3390/ma12182991
Scopus:
2-s2.0-85072561122
111. Zhilyaeva, M.A., Shulga, E.V., Shandakov, S.D.,
Sergeichev, I.V., Gilshteyn, E.P., Anisimov, A.S., Nasibulin, A.G.
(2019).A novel straightforward wet pulling technique to fabricate carbon nanotube fibers.
Carbon,15069-75
DOI: 10.1016/j.carbon.2019.04.111
Scopus:
2-s2.0-85065442637 112.
Zhilyaev, P., Iakovlev, E.,
Akhatov, I. (2019).Liquid-gas phase transition of Ar inside graphene nanobubbles on the graphite substrate. Nanotechnology,30(21)
DOI: 10.1088/1361-6528/ab061f
Scopus:
2-s2.0-85063276025
113. Kabanov, D.I.,
Kasimov, A.R. (2019).A minimal hyperbolic system for unstable shock waves. Communications in Nonlinear Science and Numerical Simulation,70282-301
DOI: 10.1016/j.cnsns.2018.10.022
Scopus:
2-s2.0-85056215674 114. Salimon, A.I., Statnik, E.S., Zadorozhnyy, M.Y., Senatov, F.S., Zherebtsov, D.D.,
Safonov, A.A., Korsunsky, A.M.
(2019).Porous open-cell UHMWPE: Experimental study of structure and mechanical properties. Materials,12(13)
DOI: 10.3390/ma12132195
Scopus:
2-s2.0-85068830883 115. Iakovlev, E.S.,
Zhilyaev, P.A., Akhatov, I.Sh.
(2019).Obtaining the state of matter inside graphene nanobubble from its shape.
Journal of Physics: Conference Series,1147(1)
DOI: 10.1088/1742-6596/1147/1/012006
Scopus:
2-s2.0-85062385390 116. Maksimov, Y.M., Podlovchenko, B.I., Volkov, D.S., Maslakov, K.I.,
Evlashin, S.A. (2019). Effect of Pb 2+ ions in solution on the galvanic displacement of lead by platinum.
Mendeleev Communications,29(1) 83-85
DOI: 10.1016/j.mencom.2019.01.028
Scopus:
2-s2.0-85061719287 117. Dubinskii, S.,
Fedulov, B., Feygenbaum, Y., Gvozdev, S., Metelkin, E.
(2019).Experimental evaluation of surface damage relaxation effect in carbon-fiber reinforced epoxy panels impacted into stringer.
Composites Part B: Engineering,176
DOI: 10.1016/j.compositesb.2019.107258
Scopus:
2-s2.0-85070508130 118. Zhao, H., McLoughlin, L., Adzhiev, V.,
Pasko, A. (2019)."Why do we not buy mass customised products?" - An investigation of consumer purchase intention of mass customised products.
International Journal of Industrial Engineering and Management,10(2) 181-190
DOI: 10.24867/IJIEM-2019-2-238
Scopus:
2-s2.0-85069507862 119. Markov, A.,
Abaimov, S., Sevostianov, I., Kachanov, M., Kanaun, S.,
Akhatov, I. (2019).The effect of multiple contacts between crack faces on crack contribution to the effective elastic properties.
International Journal of Solids and Structures,16375-86
DOI: 10.1016/j.ijsolstr.2018.12.021
Scopus:
2-s2.0-85058972159 120. Vyunishev, A.M., Bikbaev, R.G., Svyakhovskiy, S.E., Timofeev, I.V., Pankin, P.S.,
Evlashin, S.A., Vetrov, S.Y.A., Myslivets, S.A., Arkhipkin, V.G.
(2019).Broadband Tamm plasmon polariton.
Journal of the Optical Society of America B: Optical Physics,36(8) 2299-2305
DOI: 10.1364/JOSAB.36.002299
Scopus:
2-s2.0-85071399393
121. Iakovlev, E.,
Zhilyaev, P., Akhatov, I. (2019).Modeling of the phase transition inside graphene nanobubbles filled with ethane.
Physical Chemistry Chemical Physics,21(33) 18099-18104
DOI: 10.1039/c9cp03461g
Scopus:
2-s2.0-85071466687 122. Alekseev, A., Andreenko, E., Orlovskiy, I., Gorshkov, A., Akhtyrsky, S., Kozlov, A., Smekalin, V., Ulyanitskiy, V., Khmelnitsky, R.,
Evlashin, S., Eberle, S.
(2019).A study of methods to enhance infrared emissivity of Molybdenum surfaces.
Fusion Engineering and Design,146144-148
DOI: 10.1016/j.fusengdes.2018.12.002
Scopus:
2-s2.0-85058640652 123. Aristov, V.V., Ilyin, O.V.,
Rogozin, O.A. (2019).A hybrid numerical scheme based on coupling discrete-velocities models for the BGK and LBGK equations.
AIP Conference Proceedings,2132
DOI: 10.1063/1.5119547
Scopus:
2-s2.0-85070664884 124.
Abaimov, S.G., Trofimov, A., Sergeichev, I.V., Akhatov, I.S. (2019).Multi-step homogenization in the Mori-Tanaka-Benveniste theory.
Composite Structures,223
DOI: 10.1016/j.compstruct.2019.03.073
Scopus:
2-s2.0-85065835557 125.
Fedulov, B., Fedorenko, A. (2019).The analysis of the worst-case distribution of the damage in composite material imposed by a low velocity impact.
Procedia Structural Integrity,18399-405
DOI: 10.1016/j.prostr.2019.08.181
Scopus:
2-s2.0-85074777787 126. Dautov, S.S., Shornikov, P.G., Rezyapova, L.R.,
Akhatov, I.S. (2019).Increasing thermal and mechanical properties of thermal barrier coatings by suspension plasma spraying technology.
Journal of Physics: Conference Series,1281(1)
DOI: 10.1088/1742-6596/1281/1/012008
Scopus:
2-s2.0-85072219378
127. Kuts, V.A.,
Nikolaev, S.M., Kiselev, I.A.
(2019).Application of combined technique for chatter prediction in 5-axis milling.
Lecture Notes in Mechanical Engineering,0(9783319956299) 683-691
DOI: 10.1007/978-3-319-95630-5_71
Scopus:
2-s2.0-85060079879
128.
Markov, A., Trofimov, A., Abaimov, S., Akhatov, I. (2019).On the applicability of replacement relations to tetrahedron-like inhomogeneities.
International Journal of Solids and Structures,1671-13
DOI: 10.1016/j.ijsolstr.2019.02.020
Scopus:
2-s2.0-85062260433
129.
Safonov, A., Chugunov, S., Tikhonov, A.,
Gusev, M., Akhatov, I. (2019).Numerical simulation of sintering for 3D-printed ceramics via SOVS model.
Ceramics International,45(15) 19027-19035
DOI: 10.1016/j.ceramint.2019.06.144
Scopus:
2-s2.0-85067294098
130. Kuzminova, Y.O., Firsov, D.G., Konev, S.D., Dudin, A.A., Dagesyan, S.A.,
Akhatov, I.S., Evlashin, S.A. (2019).Structure control of 316L stainless steel through an additive manufacturing.
Letters on Materials,9(4) 551-555
DOI: 10.22226/2410-3535-2019-4-551-555
Scopus:
2-s2.0-85078915834
131. Chefonov, O.V., Ovchinnikov, A.V.,
Evlashin, S.A., Agranat, M.B.
(2019).Degradation and Destruction of Thin Steel Films under Repeated Exposure to Ultrashort Pulses of THz Radiation.
Technical Physics Letters,45(6) 570-572
DOI: 10.1134/S1063785019060051
Scopus:
2-s2.0-85069212043 132.
Maltsev, E.A., Maglinets, Y.A., Tsibulskii, G.M.
(2019).The Technology to Identify Firebreak Plowing Objects Based on the Satellite Data of the Earth Remote Sensing.
E3S Web of Conferences,75
DOI: 10.1051/e3sconf/20197501006
Scopus:
2-s2.0-85063026194
133. Aslyamov, T.,
Akhatov, I. (2019).Zeros of partition functions in the NPT ensemble.
Physical Review E,100(5)
DOI: 10.1103/PhysRevE.100.052118
Scopus:
2-s2.0-85075775576 134. Fedorenko, A.N.,
Fedulov, B.N., Lomakin, E.V.
(2019).Buckling problem of composite thin-walled structures with properties dependent on loading types.
PNRPU Mechanics Bulletin,2019(3) 104-111
DOI: 10.15593/perm.mech/2019.3.11
Scopus:
2-s2.0-85074400084
135.
Chugunov, S., Kazak, A., Amro, M., Freese, C.,
Akhatov, I. (2019).Towards creation of ceramic-based low permeability reference standards.
Materials,12(23)
DOI: 10.3390/ma122333886
Scopus:
2-s2.0-85075902236 136. Abramova, O.A., Pityuk, Y.A., Gumerov, N.A.,
Akhatov, I.S. (2019).Three-dimensional simulation of stokes flow around a rigid structure using FMM/GPU accelerated BEM.
Communications in Computer and Information Science,965427-438
DOI: 10.1007/978-3-030-05807-4_36
Scopus:
2-s2.0-85059889436
137. Lebedev, O.V.,
Trofimov, A., Abaimov, S.G., Ozerin, A.N.
(2019).Modeling of an effect of uniaxial deformation on electrical conductance of polypropylene-based composites filled with agglomerated nanoparticles.
International Journal of Engineering Science,144
DOI: 10.1016/j.ijengsci.2019.103132
Scopus:
2-s2.0-85070224135
138. Bondarchuk, D.A.,
Fedulov, B.N., Fedorenko, A.N., Lomakin, E.V.
(2019).The analysis of residual stresses in layered composites with [0°/90°] layup.
PNRPU Mechanics Bulletin,2019(3) 17-26
DOI: 10.15593/perm.mech/2019.3.02
Scopus:
2-s2.0-85075066788
139. Lomakin, E.V.,
Fedulov, B.N., Fedorenko, A.N. (2019).Nonlinear Effects in the Behavior and Fracture of Composite Materials.
IOP Conference Series: Materials Science and Engineering,581(1)
DOI: 10.1088/1757-899X/581/1/012015
Scopus:
2-s2.0-85070629903 140.
Nikolaev, S., Belov, S.,
Gusev, M., Uzhinsky, I. (2019).Hybrid Data-Driven and Physics-Based Modelling for Prescriptive Maintenance of Gas-Turbine Power Plant.
IFIP Advances in Information and Communication Technology,565379-388
DOI: 10.1007/978-3-030-42250-9_36
Scopus:
2-s2.0-85082131955 141.
Gusev, M.P., Nikolaev, S.M., Papulov, A.P., Belov, S.D., Padalitsa, D.I
., Uzhinsky, I.K. (2019).Optimization-driven product development to support digital twin creation on the small uav case study.
Simulation Series,2019
Scopus:
2-s2.0-85074832499 142. Zhao, H., McLoughlin, L., Adzhiev, V.,
Pasko, A. (2019).3D mass customization toolkits design, Part II: Heuristic evaluation of online toolkits.
Computer-Aided Design and Applications,16(2) 223-242
DOI: 10.14733/cadaps.2019.223-242
Scopus:
2-s2.0-85053330167 143.
Fedorenko, A.N., Fedulov, B.N., Lomakin, E.V.
(2019).Failure analysis of laminated composites with shear nonlinearity and strain-rate response. Procedia Structural Integrity,18432-442
DOI: 10.1016/j.prostr.2019.08.185
Scopus:
2-s2.0-85074758151 144.
Fedorenko, A.N., Fedulov, B.N. (2019).Failure analysis of composite materials subjected to low-velocity impact.
Procedia Manufacturing,37167-173
DOI: 10.1016/j.promfg.2019.12.031
Scopus:
2-s2.0-85080081431 145.
Fedulov, B., Bondarchuk, D.,
Fedorenko, A. (2019).Influence of manufacturing process on the strength of composite materials.
Procedia Manufacturing,37541-548
DOI: 10.1016/j.promfg.2019.12.086
Scopus:
2-s2.0-85080063884 146. Pityuk, Y.A., Gumerov, N.A., Abramova, O.A., Zarafutdinov, I.A.,
Akhatov, I.S. (2019).Accelerated Boundary Element Method for 3D Simulations of Bubble Cluster Dynamics in an Acoustic Field.
Communications in Computer and Information Science,1063335-349
DOI: 10.1007/978-3-030-28163-2_24
Scopus:
2-s2.0-85070577350
147.
Fedulov, B.N., Fedorenko, A.N., Lomakin, E.V.
(2019).Evaluation of the Residual Strength of Structures Made of Composite Materials Based on a Conservative Distribution of Damage Parameters.
IOP Conference Series: Materials Science and Engineering,581(1)
DOI: 10.1088/1757-899X/581/1/012023
Scopus:
2-s2.0-85070604200 148. Kharlan, I., Rakhimov, R.,
Uzhinsky, I., Milov, A., Mahbubur, R.
(2019).Prospects for the use of helicon thrusters for space exploration.
Proceedings of the International Astronautical Congress, IAC,2019-
Scopus:
2-s2.0-85079158990 149. Pityuk, Y.A., Gumerov, N.A., Abramova, O.A., Zarafutdinov, I.A.,
Akhatov, I.S. (2019).Numerical Study of Interaction of Two Deformable Bubbles in an Acoustic Field.
Journal of Applied Mechanics and Technical Physics,60(4) 661-668
DOI: 10.1134/S0021894419040096
Scopus:
2-s2.0-85073012394 150. Lomakin, E.,
Fedulov, B. (2019).Plastic deformation and failure of solids with stress state dependent properties.
Procedia Structural Integrity,18549-555
DOI: 10.1016/j.prostr.2019.08.199
Scopus:
2-s2.0-85074788485
151.
Aslyamov, T., Khlyupin, A., Pletneva, V.,
Akhatov, I. (2019).Theoretical Approach to Rough Surface Characterization for Silica Materials.
Journal of Physical Chemistry C,
DOI: 10.1021/acs.jpcc.9b07761
Scopus:
2-s2.0-85075554110 152. Tereshin, A., Adzhiev, V., Fryazinov, O., Marrington-Reeve, F.,
Pasko, A. (2019).Automatically controlled morphing of 2d shapes with textures∗.
SIAM Journal on Imaging Sciences,13(1) 78-107
DOI: 10.1137/19M1241581
Scopus:
2-s2.0-85083820696 153. Bondarchuk, D.A.,
Fedulov, B.N., Fedorenko, A.N. (2019).The effect of residual stress induced by manufacturing on strength on free edge of carbon-epoxy composite with [00/900]n layup.
Procedia Structural Integrity,18353-367
DOI: 10.1016/j.prostr.2019.08.175
Scopus:
2-s2.0-85074824090
154.
Grishaev, V.G., Bakulin, I.K.,
Akhatov, I.S. (2019).Large fragmentation under drop suspension splashing.
Journal of Fluids and Structures,91
DOI: 10.1016/j.jfluidstructs.2019.102718
Scopus:
2-s2.0-85071299952
155. Shakirov, E., Brandl, F.J., Bauer, H., Kattner, N., Becerril, L.,
Fortin, C., Lindemann, U., Reinhart, G.,
Uzhinsky, I. (2019).Integration of engineering and manufacturing change management: Infrastructure and scenarios for teaching and demonstration.
Procedia CIRP,81535-540
DOI: 10.1016/j.procir.2019.03.151
Scopus:
2-s2.0-85068479180
156.
Rogozin, O.A., Aristov, V.V., Peng, A., Li, Z.
(2019).Regularization and modeling of the Boltzmann collisional operator: Tcheremissine and Shakhov approaches.
AIP Conference Proceedings,2132
DOI: 10.1063/1.5119548
Scopus:
2-s2.0-85070698552
S4.
Shishkovsky, I., Kakovkina, N., & Sherbakov, V.
(2019). Layerwise fabrication of refractory NiCrSiB composite with gradient grow of tungsten carbide additives by selective laser melting.
Optics and Laser Technology, 120 doi:10.1016/j.optlastec.2019.105723
Scopus:
2-s2.0-85070107629